Boundary Kits include Boundary Flags and Boundary Wire. If you need additional wire and flags, we offer two sizes of boundary kits, the RFA-500 includes 500 feet of wire and 50 flags, the RFA-1000 includes 1,000 feet of wire and 100 flags. You can also purchase wire and flags separately so you can get exactly what you need. Use the guide at the bottom of the page to determine the amount of wire needed to enclose your property.  Our wire and flags can be used with any pet containment system.

Use this guide to determine how much wire you need to enclose your yard. These figures are estimates, based on typical layouts. You may need more wire if you're doing interior loops to boundary off gardens, swimming pools or other protected areas. We will provide you wire in 500 foot increments on 500 or 1,000 foot spools.

See guide below

 

To Cover This Size Area	You Need This Amount of Wire
1/3 Acre	500 Feet
1/2 Acre	600 Feet
1 Acre	1000 Feet
2 Acres	1300 Feet
3 Acres	1500 Feet
4 Acres	1800 Feet
5 Acres	2000 Feet

For larger areas, use the following formula: Multiply the total acreage by 43,560- i.e. 10 acres x 43,560 = 435,600

Find the square root of the above number - square root of 435,600 = 660 (this is the length of each side of a 10 acre area that is square in shape. Even if your area is not square, if you multiply this number by four, this is the approximate length of the four sides of a 10 acre area.)

Therefore, one would need approximately 2,640 feet of wire to enclose the perimeter of a 10 acre area. You will need additional wire to run from the transmitter to the perimeter and/or for any interior loops, etc.